thebrewshopuk

Barrels, Gas and Barrel Spares

A complete range of barrels and the spares you need.

We keep spares for most barrels and valves, if you don't see it please ask.

The range of barrels has been reduced but we continue to keep spares for all the barrels

Click on more details for a picture!

Rotokeg. 4" neck 40 pint barrel

The new Rotokeg.

A nice big 4" neck barrel. Uses the standard valve and fits the cylinders we and most of the homebrew trade supplies.

It's strong and very well made. Holds about 51/2 gallons so there's room for storage of the natural Co2 !

It's a top tap which means it doesn't have to hang over the edge of the shelf. It can sit at the back.

It does mean you need a gas supply to get the beer out. The natural gas off the beer will dispense most of your beer but you do need to purchase either the s30 or the small injector that takes the small bulbs.

2" inch neck barrel

Reliable cheap barrel with gas valves.

Takes the gas injector or the s30 cylinder

Beersphere Barrel sorry discontinued

4" Neck barrel so you can get your hand in to clean it.

Top tap, uses a float system to dispense the beer. You will need a gas system with this barrel.

Because the tap is at the top it can sit at the back of a shelf or worktop and doesn't have to hang over the edge.

Supercask Barrel 4" neck sorry discontinued

discontinued- but we will continue to supply spare parts - if you need anything not listed please ask.

Pictures here so you know which barrel you've got !

S30 Gas (Refill Only) We know some people are having trouble getting refils from their local shops - If you mail us we will try to find you a local supplier

Re-fill cylinder. Send your old one back to us, we'll send a full one back. Post for this is £5.00 if you just order a refill. We'll post it back free if you order other items off us.Cut the end off an empty pop bottle, Pack it with newspaper and it makes a perfect 'box' for the refil!

S30 New Gas Cylinder

Full cylinder. Return when empty. Fits all the barrels we supply. An easier system for post customers is gas 110, the screw on injector with disposable bulbs.

Gas Injector

Takes the small throw away soda syphon bulbs and is a good system for mail customers. Saves returning the big s30 cylinders

Fits all the Hambleton Barrels. It will also fit most other barrels.

Pack of ten small gas bulbs

These fit the co2 injector and are the old soda syphon bulbs.

Just throw away when used

4" Red cap with two valves

4" Red Cap Hambleton bard +2 Brass Valves. The injector and the pressure relief.

Your cap might be an old white one but if it's black it's off a different barrel it won't fit.

Fits all current 4" neck barrels

4" Plain cap with holes but no valves

Spare cap only. No Valves but has the holes already cut. If you want one with no holes please ask.

2" Cap for Other Makes of Barrel

Cap and valves , fits all the barrels that the red cap doesn't fit.

Flat 2" white barrel washer

This is a flat white washer, fits lots of barrels. Make sure you order the right one.

Brass Release and Injection Valve

Look at the picture! This is the combined release and injection valve. Fits many barrels including the old beersphere with plates

Injection valve for the 4"cap

Small brass injection valve with orange washer. This is off the red 4" cap.

Pressure relief valve for 4" barrel

Pressure relief valve foir the red 4" cap.

Brown pressure relief rubber

Spare brown washer, this is on top of the valve. It might be under a metal collar and is the biggest of the two rubber washers.

Small Flat black washer

Flat black washer that goes between the valve and the cap. Yours might be a white washer, this is a better product. Fits most valves of this type

Purple valve washer

Spare small purple inlet sleeve for the above valve. Your old one may be black or white. This is the inlet rubber which sits under the cap

Orange Rubber

Washer for the inlet only valve

Yellow rubber for pressure relief valve

Yep, the yellow rubber

Pack of Spare washers for 2" cap and Rotokeg

The spares pack for the valve fitted to most of the 2" caps.

This is the small white one

Three washers in total

Also fits the new Rotokeg and the old beersphere with the two stainless plates

Pack of spare washers for the 4" cap

Set of three washers for the two valves on the big

4" cap, the cap is usually a red one.

If the cap has two valves then it's probably this pack